This website has been created in order to allow the purchase and consultation of CNH Industrial technical documents. The documents can be purchased by all independent operators in the agricultural tractor industry (independent mechanics, automobile clubs, road assistance companies, operators who offer overhaul and test services and operators who offer training for mechanics) and the CNH Industrial service network. For all B2B operators (manufacturers and distributors of spare parts, manufacturers of equipment or instruments for repair, publishers of technical informations, etc.) technical document supply contracts are available with rules and specific agreements stipulated directly with CNH Industrial Italia SpA., in accordance with the current laws governing access to vehicle repair and maintenance information.

Currently, the European regulation concerning "access to vehicle repair and maintenance information" is Regulation (EU) No 167/2013, Commission Delegated Regulations (EU) 1322/2014, 2015/96 and 2015/208 and Commission Implementing Regulation (EU) 2015/504. We confirm the application of the provisions of these regulations in all of the website in terms of times, contents, accesses and availability of vehicle repair and maintenance technical documents indicated by the regulation. Ref.: http://eur-lex.europa.eu

Currently, the European regulation concerning "access to vehicle repair and maintenance information" for agricultural or forestry tractors repair and maintenance information Regulation (EU) No 167/2013. We confirm the application of the provisions of this regulation in all of the website in terms of times, contents, accesses and availability of vehicle repair and maintenance technical documents indicated by the regulation. For all of the details or any specific deviations related to this regulation see the "Terms and Conditions" section on the website. Ref.: http://eur-lex.europa.eu

This website protects and guarantees all the personal data of registered users by applying to all its parts the "LAW TO PROTECT PERSONAL DATA" defined by Legislative Decree (IT) no. 196 of 30 June 2003. Ref.: http://www.parlamento.it

The following is available for all vehicles handled: - Repair and maintenance manuals containing repair and maintenance procedures, wiring diagrams, troubleshooting and general mechanical and electrical/electronic information; - Repair times; - Special Tools & Equipment catalogue; - Scheduled Maintenance. - Spare parts catalogue; - Service Bulletins; - Use and maintenance handbooks. It is also possible to search these documents searching by the VIN for the specific vehicle, check for the presence of recall campaigns and reprogram control units using specific software tools available on the website (see the specific section for more information). Consultation of this technical information is available by purchasing subscriptions broken down as hourly, daily, weekly, monthly and annually.

- Repair and maintenance manuals containing repair and maintenance procedures, wiring diagrams, troubleshooting and general mechanical and electrical/electronic information; - sections of repair and maintenance manuals; - repair and maintenance monographs; - use and maintenance handbooks; - Repair times; - Special Tools & Equipment catalogue; - Scheduled Maintenance. - Spare parts catalogue; - Service Bulletins; - Use and maintenance handbooks. For further information please consult the "FAQ" (Frequenly Asked Questions) section fully dedicated to the purchase and consultation of the documentation available on the WEB portal.

CNH Industrial's policy regarding technical documents, requires that all documents distributed on IT support, must be adequately protected in order to ensure their economic and intellectual value and that they cannot be altered, forbidding their modification and guaranteeing safe and guided access to independent operators and the CNH Industrial service network alike. All the documents can be printed for in-house use only. The documents cannot be sold, copied, duplicated or rented.

- Repair and maintenance manuals; - repair and maintenance monographs; - troubleshooting; - service bulletins; - special tools; - parts catalogue consultation; - diagnostic equipment.

You need to register with the website entering all the company data (registration is free). After registration, you need to find the information you want from the different types available in the catalogue and define the duration and type of subscription to purchase. It is possible to search the information available on the website at no cost, including searching for specific VINs. To complete the purchase, you need to use the related section performing the transaction with a credit card from one of the participating circuits. For further information please consult the "FAQ" section Repair and Maintenance Information" (visible only to users who are logged in) fully dedicated to the purchase and consultation of the information available on the WEB portal.

The cost of the documents available on this website, is defined by the subscriptions which can be taken out in the dedicated section. For further information regarding subscriptions please consult the "FAQ" section Repair and Maintenance Information (visible only to registered users who are logged in) fully dedicated to the purchase and consultation of the repair and maintenance information available on the WEB portal. The price of the technical documents for independent repairers is proportional and non-discriminatory compared to the cost for official CNH Industrial repairers.

CNH Industrial authorised workshops are already registered and do not need any additional passwords. If you are a CNH Industrial authorised workshop, and you do not have a password for accessing the portal, contact the representative for your Market.

To register just go to the home page of the website and click on: "SIGNUP". Once the page is open: - carefully read the terms of the agreement for using the web portal and documents; - confirm your agreement with the contract terms and conditions; - fill in the form with all the Company data paying particular attention to the mandatory parts; - after clicking on "SAVE" an email will be sent to the email address entered on the form; - make sure the email arrives and complete the registration procedure following the instructions contained in the message. If you do not receive anything (within 30 minutes), it is possible that the message has been marked as "SPAM". In this case check the folder where spam is archived. N.B. to avoid this problem again in the future, enter the sender's address of the registration confirmation message in the "whitelist" (list of secure senders).

To access the website reserved area, just click on LOGIN in the top right corner of the homepage and click the "Login" button after entering your "Username" and "Password".

Make sure your "Username" and "Password" are correct paying particular attention to capital letters, lower case letters and special characters. If this access data is shared with other people, make sure the password has not been changed. To reset your "Password" visit the homepage of the website, click "Login" and then click "Forgot your password?". In the event of further problems please submit a support request by clicking "No" in the form below.

Click on "Continue with the website". If the website certificate is "expired", the browser program (Internet Explorer 10.0 or higher) displays an informative message.

It is not possible to retrieve your "Password" but you can reset it and choose a new one. To reset your "Password" visit the homepage of the website, click "Login" and then click "Forgot your password?". You will then be redirected to another page: enter your "UserID" and answer the security questions. Choose a new "Password" following the rules explained in the page and then click on "Change password". You can now enter the website using your "UserID" and your new "Password". In the event of further problems please submit a support request by clicking "No" in the form below.

To cancel your account please submit a support request by clicking "No" in the form below.

You need: - a Personal Computer with: -- Windows 7 or higher; -- Internet Explorer 10.0 or higher, or Mozilla Firefox 14.0 or higher; -- Adobe Reader 10 or higher; -- Adobe Flash Player - use an Internet connection; - be registered with this website; - possess a credit card.

It is PROHIBITED to sell, copy, transfer or rent the purchased documents. All of the purchased documents can be freely printed for in-house use, like any other PDF file.

You need to be registered with the portal to purchase an information consultation subscription. To make the purchase, you need to first log in, click on "On-line purchase" to display the list of available subscriptions: once you select the one you want click on its shopping cart to add it to the "selected products" list. Once you finish selecting click on the "Continue" button and check the shopping cart "Summary" window. Agree to the purchase conditions and continue by clicking on "Confirm Order": you will then be connected to the payment by credit card page. Having completed your purchase, please proceed with the activation of the purchased subscriptions.

Yes, a subscription can only be purchased by credit card.

No, there is no list of available documents because the system, after having performed the vehicle search, is able to indicate the number of the document necessary for the repair.

The list of subscriptions available for purchase is visible to logged in users. Once you have logged in click on "On-line purchase": a window will open with a list of all the available subscriptions, with a description, the duration and cost. Next to each subscription you can click on the "Shopping cart" to add it to the list of documents you want to purchase.

The purchase involves a subscription for a vehicle range (and not for single manuals). The cost of the documents is based on the duration: - H = hour - D = day - W = week - M = month (30 days) -Y = year.

No, a service can only be purchased in two languages. At the time of activation you can state your preferences which will be maintained for the entire duration of the subscription. You can make a new purchase for the same service, including in different languages.

Yes, you can also express new language preferences, even if they are different from the first purchase.

You can find the course catalogue and the relative information at the following link: http://lmscnhi-agce.cnhind.com

You can register for a course and request information at the following link: http://lmscnhi-agce.cnhind.com Select the course you are interested in from the catalogue and you will find all the contact information required for registration.

The software is supplied with the EST kit which can be ordered via the Diagnostic Equipment link in the Catalog of the RMI website.

To order the EST diagnostics tool simply use the link on the RMI Website.

The EST diagnostics tool supplied by CNH Industrial is not the only one which can be used to carry out vehicle diagnostics. Others can be used provided they are compatible with current VCI standards.

No, diagnostics on all CNH Industrial tractors can be performed with one tool.

To order a new VCI simply use the link on the RMI Website.

Contact CNH Industrial directly using the form below in order to receive this information: CLICK HERE

The documentation for the use of the CNH Industrial diagnostic tool is available in the Service Manual on the RMI Website.

The documentation for the use of the CNH Industrial diagnostic tool is available in the Service Manual on the RMI Website.

Contact CNH Industrial directly by answering NO to the information about the utility of the FAQ